
Coral Springs Epoxy is a concrete flooring contractor serving Tamarac, FL, specializing in epoxy coatings, garage floor systems, and concrete resurfacing for the city's older CBS homes. We have worked throughout Broward County since 2015 and know the slab conditions common in Tamarac's 1960s and 1970s housing stock.

Tamarac homes built in the 1960s and 1970s have some of the oldest concrete slabs we work on in Broward County. Many of these slabs have absorbed decades of moisture from the high water table and have had multiple paint or coating attempts over the years. A proper epoxy installation, beginning with diamond grinding and a vapor-barrier primer, is the right approach for this housing stock. See the full details on our epoxy floor coatings page.
A large share of Tamarac homes have attached or single-car garages that serve multiple purposes, from car parking to storage to workshop space. The bare concrete slabs in these garages, many of them 50 or more years old, are porous and stain easily. An epoxy or polyurea garage coating seals the surface against oil, fertilizer, and water, and it is far easier to keep clean than bare concrete in South Florida's dusty, humid conditions.
Tamarac has a large inventory of older patios, driveways, and pool decks that are structurally sound but visually deteriorated after decades of Florida sun and rain. Concrete resurfacing with a bonded overlay addresses the surface wear without the cost and disruption of a full concrete replacement, which makes it the right call for many homeowners in this market.
Many Tamarac properties have small screened pools or open patios with concrete decks that were poured in the 1970s or 1980s. Those decks have been through decades of wet-foot traffic, pool chemical exposure, and Florida UV, and the surface shows it. A new pool deck coating restores the appearance, adds slip resistance, and makes the surface cooler underfoot during the summer months.
Concrete sealing is a practical first step for Tamarac driveways, walkways, and patios that are not yet due for a full resurfacing. Applying a quality penetrating or topical sealer protects against Tamarac's annual 60-inch rain load and high humidity, slowing the cracking, staining, and surface erosion that accumulate over years of South Florida weather exposure.
Older Tamarac slabs often have layers of paint, adhesive from tile or carpet removal, or surface carbonation that prevent new coatings from bonding properly. Diamond grinding removes these barriers and opens the surface pores so primers and coatings can penetrate and adhere. It is the single most important step in any floor coating job, and it is one that is commonly skipped by contractors cutting corners on price.
Tamarac was incorporated in 1963 and developed as a planned community, with most of its neighborhoods built out between the 1960s and mid-1980s. That makes Tamarac's housing stock among the oldest in Broward County, with a large share of slabs that are 40 to 60 years old. These homes were built on land reclaimed from the Everglades on a high water table, and the flat terrain means water drains slowly. The combination of old concrete, high ground moisture, and annual rainfall averaging around 60 inches creates persistent moisture vapor conditions that will cause any coating to fail if the slab is not properly tested and primed before application.
Tamarac also has a notably older population and a large share of attached villas, townhomes, and low-rise condos that were part of the city's original planned adult community design. Many of these properties have HOA rules that govern what exterior work can be done and what finishes are permitted, so homeowners should check with their association before scheduling driveway or patio work. On the interior side, deferred maintenance is common in Tamarac's older homes, and floors that have had carpet, tile, or vinyl installed and then removed often have adhesive residue and surface damage that requires grinding and patching before a new coating can go down successfully. Skipping that preparation step on a 50-year-old Tamarac slab is the most direct path to a job that fails within a year.
Our crew works throughout Tamarac regularly, and we understand the local conditions that affect concrete flooring work here. The homes we see most often in Tamarac are single-story concrete block structures with slab-on-grade foundations, many of them in villa or cluster communities that were developed as part of the original planned retirement community build-out. Slabs on these properties commonly show high moisture vapor readings, surface carbonation from age, and the remnants of multiple flooring installations that have been removed over the decades. When permits are required, we are familiar with the City of Tamarac building and permitting process.
Tamarac runs roughly along Commercial Boulevard, which is the main east-west corridor through the city and a reference point most residents use daily. The Mainlands communities near the lakes in central Tamarac and the neighborhoods closer to the Florida Turnpike on the western edge of the city are both areas we serve regularly. The Tamarac Sports Complex on Southgate Boulevard is another landmark residents know well, and the neighborhoods around it represent the kinds of villa and single-family homes that make up much of our Tamarac workload.
Tamarac borders several communities we also serve. If you are in Lauderhill, FL to the south or in North Lauderdale to the east, we cover the full surrounding area. Each job gets the same slab assessment, moisture testing, and coating process regardless of which side of the city line you are on.
Call us or submit a request online, and we will get back to you within one business day. We will ask a few questions about your floor and schedule a free on-site visit at a convenient time.
We visit your Tamarac property, inspect the slab, test for moisture vapor, identify any cracks or old coating layers, and give you a written estimate on the spot. No cost, no commitment.
We diamond grind the surface, fill cracks and spalls, and apply the coating system in the correct sequence. Most Tamarac residential jobs run two to three days from prep through final topcoat.
After the floor cures, we do a walkthrough with you to confirm the result, leave you with care instructions, and make sure you have a direct contact for any follow-up questions.
Serving Tamarac and surrounding Broward County communities. No obligation, no pressure - a clear slab assessment and a written price before any work begins.
(754) 318-0064Tamarac is a city of roughly 70,000 residents packed into about 12 square miles in central Broward County, making it one of the more densely settled communities in the county. It was incorporated in 1963 and developed from the outset as a planned community, initially marketed to active adults and retirees. That history shapes everything about Tamarac's built environment: the housing stock is predominantly concrete block construction from the 1960s through the 1980s, the neighborhoods are compact and walkable, and a significant share of residents are long-term owners who have lived in the same home for decades. The Mainlands of Tamarac Lakes communities are among the most recognized original neighborhood names in the city, and they exemplify the attached villa and lake-front layout that defines much of Tamarac's residential character.
The city is bordered by Lauderhill and North Lauderdale to the south and east, Coconut Creek and Margate to the north, and the Florida Turnpike to the west. Commercial Boulevard runs east-west through the heart of the city and is the main daily reference corridor for most residents. Roughly 60 percent of housing units in Tamarac are owner-occupied, which means there is steady demand for home maintenance and improvement services from people who intend to stay. Nearby North Lauderdale, FL shares a similar building era and housing type, and we serve both cities regularly throughout the year.
Durable, high-gloss epoxy coatings that protect and beautify any concrete floor.
Learn MoreHeavy-duty epoxy solutions built for high-traffic commercial and industrial environments.
Learn MoreTransform your garage with tough, easy-to-clean floor coatings that last for years.
Learn MoreFast-curing polyaspartic coatings deliver exceptional durability with same-day completion.
Learn MoreStunning metallic finishes that create a one-of-a-kind, luxurious floor appearance.
Learn MoreChemical- and thermal-resistant urethane cement for demanding industrial floor applications.
Learn MoreSmooth, reflective polished concrete that is low-maintenance and long-lasting.
Learn MoreVibrant acid or water-based stains that give concrete a rich, decorative color.
Learn MoreClassic terrazzo installations and restorations delivering timeless, elegant floors.
Learn MoreMoisture-resistant basement floor solutions that improve comfort and usability.
Learn MoreProfessional grinding and prep work that ensures every coating bonds correctly.
Learn MoreProtective sealers that guard concrete against stains, moisture, and daily wear.
Learn MoreResurface worn or damaged concrete with durable overlays at a fraction of replacement cost.
Learn MorePerfectly level, seamless overlays that create a flawless base for any floor finish.
Learn MoreSlip-resistant, UV-stable pool deck coatings that keep outdoor surfaces safe and attractive.
Learn MoreComplete removal of old coatings and adhesives to prepare floors for new installation.
Learn MoreCall us today or submit an online request. We respond within one business day and provide free on-site estimates throughout Tamarac and surrounding Broward County communities.