Loading...
Serving Coral Springs, FL and surrounding areas. (754) 318-0064
Coral Springs Epoxy handles epoxy coatings, garage floors, polished concrete, and everything in between. We serve homeowners and businesses across Coral Springs and surrounding Broward County communities.
Coral Springs Epoxy is a licensed concrete flooring contractor in Coral Springs, FL, offering 16 concrete and epoxy services to homeowners and businesses across Broward County. Whether your garage floor is crumbling, your commercial space needs a chemical-resistant surface, or you want a polished concrete finish that actually looks good, we handle the whole job from surface prep to final coat. We serve 12 cities in the area and have been doing this work since 2015.
Old concrete looking rough? Epoxy creates a hard, sealed surface that resists stains and cleans up fast.
Learn More
Need a floor that handles forklifts, chemicals, and heavy foot traffic without breaking down?
Learn More
Tired of oil stains and crumbling concrete in your garage? A coated floor transforms the whole space.
Learn More
Want a finish that cures in hours and holds its color through years of Florida sun?
Learn More
Plain floors getting old? Metallic epoxy creates a one-of-a-kind finish that looks custom from day one.
Learn More
High-heat, high-traffic areas need a floor system that won't crack, chip, or absorb chemicals.
Learn More
Bare concrete doesn't have to look industrial - polished concrete is smooth, bright, and low maintenance.
Learn More
Want warmth and color without tile? Stained concrete adds rich, permanent color to any slab.
Learn More
Ready for a classic Florida look that lasts decades? Terrazzo is durable, beautiful, and easy to maintain.
Learn More
Damp, dark basement floor making you avoid the space? The right coating makes it livable.
Learn More
Every good floor coating starts with a properly prepared surface - we do this step right.
Learn More
Uncoated concrete absorbs everything. Sealing stops stains and slows deterioration before it starts.
Learn More
Worn-out concrete doesn't always need replacing - resurfacing restores it for a fraction of the cost.
Learn More
Uneven floors cause problems for coatings, tile, and everyday use. Self-leveling compounds fix that fast.
Learn More
Hot, slippery, cracked pool deck? A fresh coating makes it safer, cooler, and much better looking.
Learn More
Old coatings that are peeling or failing need to come off completely before any new system can hold.
Learn MoreReach out by phone or through our contact form. We will ask a few quick questions about your space and schedule a time to come look at it in person. We respond within 1 business day. Do not trust a quote given without a site visit - the condition of your concrete matters too much to price blind.
We come to your property and walk the floor with you - checking for cracks, moisture, staining, and any previous coatings. You get a written estimate that breaks down exactly what is included before any work is agreed to. No pressure, no commitment required to get the estimate.
Our crew handles everything: surface grinding, crack repair, primer, color coat, and topcoat. We walk you through the finished floor before we leave and make sure you know how to care for it. Most jobs are complete in two to three days, and we stand behind our work.
We carry full general liability and workers compensation on every project. You can ask for our certificates before we start - we provide them without hesitation.
We come to your property, look at the floor, and give you a written estimate that breaks down every line item. No phone quotes, no guesses, no surprise invoices.
We have been working on concrete floors in Coral Springs and surrounding Broward County cities since 2015. We know the local climate, the housing stock, and the moisture challenges specific to South Florida slabs.
Every coating job we do comes with a written warranty covering materials and workmanship. We will walk you through the specific terms before work begins so you know exactly what is covered.
Ready to get started? Request your free estimate or call us at (754) 318-0064.
"The crew showed up on time both days and the floor was done exactly when they said it would be. My garage had oil stains that had been there for years - you cannot see them at all now. The finished surface looks cleaner than any other room in my house."
Marcus T., Coral Springs - Garage Floor Coatings
"I had gotten quotes from two other contractors before calling these guys. They were the only ones who actually tested the slab for moisture before giving me a price and explained why that mattered here in Broward County. The epoxy has been on for eight months and still looks perfect."
Sandra R., Pompano Beach - Epoxy Floor Coatings
"We needed our warehouse floor done over a weekend so we wouldn't lose production time. They got it done Friday and Saturday and we were back in operation Monday morning. The polyaspartic coating they used handles our forklift traffic without any issues."
David M., Coral Springs - Commercial and Industrial Epoxy Floor Coatings
We respond within 1 business day - no obligation, no sales pressure. After you submit, someone from our office will call you to schedule a free on-site visit where we look at your floor and give you a written estimate.
(754) 318-0064Coral Springs Epoxy is based in Coral Springs, FL and serves 12 cities across Broward County, including Pompano Beach, Coconut Creek, Parkland, and Margate. Most jobs are scheduled within the same week, and we are familiar with the housing stock, local climate conditions, and HOA environments across all of these communities.
Yes - and it is the most important variable in any Florida floor coating job. When moisture pushes up through a concrete slab, the epoxy cannot bond properly and will bubble or peel within months. Any contractor working in Coral Springs should test your slab for moisture before opening a single bucket of coating.
Standard epoxy formulas can yellow when exposed to intense UV light - a real issue in Broward County garages that face west. UV-stable topcoats and polyaspartic finishes hold their color far better under Florida sun. Ask your contractor specifically about UV resistance before choosing a finish.
Older slabs are workable, but they need more prep time. Concrete from that era in Coral Springs is more likely to have hairline cracks, staining, or surface deterioration. None of that disqualifies a floor - it just means the preparation phase takes longer and should be discussed during the estimate.
A proper system includes at least three layers: a primer or base coat, a color coat, and a clear protective topcoat. Decorative flake finishes add a broadcast step between layers. Single-coat applications are a shortcut that typically fails faster, especially in high-traffic areas.
For garages and utility spaces in South Florida, coated concrete outperforms tile in most practical ways - there are no grout lines to stain, no tiles to crack under vehicle weight, and no installation gaps for moisture to get into. Tile is better suited to living areas where aesthetics matter more than durability.
Coral Springs Epoxy is a licensed and insured concrete flooring contractor company based in Coral Springs, FL, serving homeowners and businesses across 12 Broward County communities since 2015.
We hold a contractor license issued through the FL Department of Business and Professional Regulation, and we carry current general liability and workers compensation insurance on every project we take on.
Since 2015, we have completed concrete flooring projects across 16 service categories - from basic garage floor coatings to commercial epoxy systems and polished concrete finishes. We know the local housing stock, the climate challenges that come with working in South Florida, and what it takes to get a coating to hold in a region where humidity and heat test every surface year-round.
If the slab is structurally sound but the surface is stained, pitting, or flaking, resurfacing is almost always more cost-effective than a full replacement. Replacement involves breaking out the old slab, hauling it away, and pouring new concrete - all before any coating can go down.
Look for grinding equipment. A professional crew arrives with a diamond grinder or shot blaster to mechanically open the concrete surface. If a contractor shows up with only mops and buckets and no mechanical prep equipment, that is a sign the prep work is being skipped.
UV-stable topcoats are formulated to resist the chemical breakdown that sunlight causes in standard epoxy resins. In practical terms, your floor keeps its original color instead of turning yellow or chalky after a couple of Florida summers. Worth asking about specifically for any garage with sun exposure.
Have questions about your specific floor? Call us at (754) 318-0064 or submit a request online and we will be in touch within 1 business day.
Coral Springs is a planned community in western Broward County that grew rapidly from the late 1960s through the early 1990s. Today it is home to roughly 134,000 residents and has consistently ranked as one of the safest and most family-oriented cities in Florida. The city sits at the western edge of Broward County, where suburban development meets the edge of the Everglades - which means more summer heat and humidity than coastal cities nearby, and a high water table that affects every concrete slab in the area.
The housing stock here reflects that history. Most homes in Coral Springs were built between 1970 and 1995, and many of those original concrete slabs have never been coated or properly sealed. Whether your home is near Mullins Park or out toward the western edge of the city, the slab under your garage or patio is dealing with the same moisture, heat, and age that we see on every job we take in this area. A large number of properties also back up to canals - part of the city's stormwater management system - which creates additional moisture management considerations near foundations and slabs.
Coral Springs is also a city where people take care of their homes. Roughly 70 percent of housing units are owner-occupied, and the community around places like the Coral Springs Center for the Arts reflects a strong investment in local quality of life. When you hire Coral Springs Epoxy, you are hiring a concrete contractor who works in this city every week and understands what South Florida conditions do to concrete floors over time.
By appointment only, no walk-ins.
Coral Springs Epoxy
10410 W Sample Rd, Suite 3
Coral Springs, FL 33065
MON - FRI: 7:00 AM - 8:30 PM, SAT: 8:00 AM - 5:00 PM, SUN: 9:00 AM - 5:00 PM
Call Coral Springs Epoxy today for a free on-site estimate - no obligation, no pressure, just a straight answer about what your floor needs.