
Coral Springs Epoxy is a concrete flooring contractor serving Sunrise, FL with garage floor coatings, epoxy floor systems, and pool deck resurfacing. We reply within one business day and bring hands-on knowledge of the city's 1970s-1990s housing stock.

Most homes in Sunrise have attached garages with bare concrete floors that have spent 30 to 50 years absorbing moisture vapor from the high Broward County water table. Our garage floor coatings seal the slab, block moisture, and give the space a clean, finished look that is far easier to maintain than raw concrete.
Interior concrete slabs in Sunrise's ranch-style homes often show their age through staining, dusting, and surface scaling. Epoxy coatings create a hard, seamless surface that resists the humidity and foot traffic common in South Florida homes, and they work on both residential and condo interiors.
Screened enclosures and in-ground pools are standard in Sunrise's single-family neighborhoods, and the concrete decks around those pools degrade faster in this climate than most homeowners expect. Resurfacing restores the slip resistance and appearance of an aging pool deck without the cost of full concrete replacement.
For Sunrise homeowners who want a faster cure time and stronger UV resistance than standard epoxy provides, polyaspartic coatings are a practical upgrade. They cure in hours rather than days and hold up well under the direct sunlight that hits Sunrise driveways and patio areas year-round.
Proper surface preparation is the single biggest factor in coating adhesion on South Florida slabs. Sunrise's older slabs often have adhesive residue from old tile or carpet, and grinding opens the surface profile needed for any coating to bond correctly. Skipping this step is the most common reason coatings fail prematurely.
Driveways and walkways in Sunrise are subjected to months of heavy summer rain each year, and unsealed concrete absorbs that water and begins to deteriorate from within. A quality penetrating sealer keeps moisture out of the slab and significantly extends the life of exterior concrete in Broward County's wet climate.
Sunrise was incorporated in 1961 and grew rapidly through the 1970s and 1980s, which means the bulk of the city's housing stock is now 30 to 50 years old. Those homes were built with concrete block and stucco on slab-on-grade foundations, and the concrete in and around them has been dealing with South Florida's climate for decades. The water table in western Broward County is extremely high, and the flat terrain means there is very little natural drainage to move rainwater away from foundations. That combination keeps moisture pressure against slabs year-round, which accelerates cracking, surface scaling, and coating delamination if the slab is not properly sealed or coated.
The western edge of Sunrise borders the Everglades conservation area, and homes in that part of the city can sit on soils with particularly high moisture content and organic material. Sunrise also has a significant number of condo and townhome communities built in the 1980s and 1990s, and those units have interior concrete slabs that are just as likely to need attention as the slabs in single-family homes. Understanding the construction methods used in each of these property types, and knowing what the local environment does to concrete over decades, is what allows us to prepare surfaces correctly and choose coating systems that will actually hold up.
Our crew works throughout Sunrise regularly, and we understand the local conditions that affect concrete flooring work here. The city sits on what was originally flat, marshy land, and that origin affects how every slab in Sunrise behaves. Moisture vapor emission from the soil through the concrete is a real issue on many properties, and we test for it before every job rather than assuming the reading will be within normal range.
Sunrise is a large city that spans from the busy commercial corridors near Sawgrass Mills and Amerant Bank Arena on the eastern and central sides to the quieter residential neighborhoods near Markham Park to the north. We work in all of those areas and know the kinds of homes and concrete conditions common throughout the city. Sunrise Boulevard and University Drive are the main east-west corridors, and we serve properties along both of those routes as well as the neighborhoods set back from the main roads.
We also serve neighboring Plantation and surrounding communities across western Broward County. For questions about permit requirements for exterior concrete work, the City of Sunrise Building Division handles building code compliance for the municipality.
Call or submit the contact form and give us a brief description of your project - space type, approximate size, and any visible issues like cracks or old coatings. We respond to every Sunrise request within one business day.
We come to your Sunrise property, walk the space, and test the slab for moisture. The estimate is written and itemized - no surprises at invoice time. We also tell you upfront if any conditions will affect the coating choice or timeline.
On installation day we mechanically grind the slab, address any cracks or adhesion issues, and apply the full coating system in sequence. Most residential jobs in Sunrise are complete within one to two days on-site, weather permitting.
After installation we let the coating cure - typically 24 hours before walking on it and 5 to 7 days before vehicle traffic. We walk through the finished space with you and go over care instructions before we leave the job site.
We serve homeowners and property owners throughout Sunrise, FL. Reach out by phone or form and we will be in touch within one business day.
(754) 318-0064Sunrise is a city of roughly 100,000 people in western Broward County, incorporated in 1961 and developed largely through the 1970s and 1980s as South Florida's suburban expansion pushed west from Fort Lauderdale. The city is best known outside Broward County for two landmarks: Sawgrass Mills, one of the largest outlet malls in the United States, and Amerant Bank Arena, the home of the Florida Panthers NHL team. Both sit in the eastern and central parts of the city, while the residential neighborhoods spread north and south from there. The western edge of Sunrise meets the Everglades conservation area, which means the city's western neighborhoods are defined by their proximity to open land and the high water table that comes with it.
The housing stock in Sunrise is a mix of single-family ranch-style CBS homes, townhome communities, and mid-rise condos built primarily in the 1970s, 1980s, and 1990s. Owner-occupied single-family homes dominate the residential neighborhoods, while condo and townhome communities fill many of the areas closer to the commercial corridors. Most properties have screened patios or pool decks that require regular maintenance in this climate. Broward County parks like Markham Park anchor the northern neighborhoods, and the city is well-connected by Sunrise Boulevard, Broward Boulevard, and University Drive. We also serve neighboring Lauderdale Lakes and the surrounding communities across this part of Broward County.
Durable, high-gloss epoxy coatings that protect and beautify any concrete floor.
Learn MoreHeavy-duty epoxy solutions built for high-traffic commercial and industrial environments.
Learn MoreTransform your garage with tough, easy-to-clean floor coatings that last for years.
Learn MoreFast-curing polyaspartic coatings deliver exceptional durability with same-day completion.
Learn MoreStunning metallic finishes that create a one-of-a-kind, luxurious floor appearance.
Learn MoreChemical- and thermal-resistant urethane cement for demanding industrial floor applications.
Learn MoreSmooth, reflective polished concrete that is low-maintenance and long-lasting.
Learn MoreVibrant acid or water-based stains that give concrete a rich, decorative color.
Learn MoreClassic terrazzo installations and restorations delivering timeless, elegant floors.
Learn MoreMoisture-resistant basement floor solutions that improve comfort and usability.
Learn MoreProfessional grinding and prep work that ensures every coating bonds correctly.
Learn MoreProtective sealers that guard concrete against stains, moisture, and daily wear.
Learn MoreResurface worn or damaged concrete with durable overlays at a fraction of replacement cost.
Learn MorePerfectly level, seamless overlays that create a flawless base for any floor finish.
Learn MoreSlip-resistant, UV-stable pool deck coatings that keep outdoor surfaces safe and attractive.
Learn MoreComplete removal of old coatings and adhesives to prepare floors for new installation.
Learn MoreCall Coral Springs Epoxy today for a written estimate - the longer a cracked or uncoated slab sits unaddressed, the more preparation work it typically needs.